1995 Villager Workshop Manual
Engine Cooling
REMOVAL AND INSTALLATION
Thermostat, Water
Removal
1. Drain the cooling system. Refer to the procedure in this section.
2. Remove the upper radiator hose bracket bolt and the upper radiator hose bracket.
3. Reposition the water bypass hose clamp and remove the water bypass hose (8597) from the water hose connection (8592) .
4. If equipped with A/C, remove the drier to evaporator liquid line bracket bolt and the drier to evaporator liquid line bracket to gain access to the water thermostat (8575) .
5. If equipped with A/C, remove the suction accumulator/drier bracket bolts and the suction accumulator/drier bracket.
6. If equipped with A/C, position the suction accumulator/drier (19C836) and drier to evaporator liquid line (19837) out of the way.
7. Remove the four water hose connection bolts and the water hose connection. Download File PDF
0 Comments