1999 Audi A6 Quattro Sedan V6-2.8L (AHA)
Front Bumper, Removing, Installing And Assembly Overview
1 - Bumper cover
Removing:
- Front tires removed
- Front half of wheelhousing loosened.
- Unscrew flanged nuts - 10 - on both sides.
- Unscrew screw w/washer assembly - 6 - from wheelhousing liner - 5 -.
- Remove socket-head bolts - 7 - and remove bumper cover together with impact absorber toward front.
Installing:
NOTE:
- Before installing the bumper, the expanding clips must be pressed in to the
- fender.
- When installing the tabs, the bumper cover must latch into clip - 4 -.
- Latch bumper cover - 1 - into guide - 2 -.
- Tighten flanged nuts - 10 - to 6 Nm (53 in.lb) .
- Screw in socket-head bolt - 7 - and tighten to 23 Nm (17 ft lb) . Download File PDF
0 Comments