2000 Jeep Truck Cherokee 2WD L6-4.0L VIN S
Alternator: Service and Repair
REMOVAL
1. Disconnect negative battery cable at battery.
2. Remove generator drive belt.
3. Left Hand Drive (LHD) Vehicles Only: Remove generator pivot and mounting bolts/nut. Position generator for access to wire connectors.
4. Right Hand Drive (RHD) Vehicles Only:Remove upper nut (generator adjustment nut) and both belt adjustment bolts. Remove generator lower nut/bolt. Position generator for access to wire connectors.
5. If equipped, unsnap plastic cover from B+ terminal.
6. Remove B+ terminal mounting nut at rear of generator.Disconnect terminal from generator.
7. Disconnect field wire connector at rear of generator by pushing on connector tab.
8. Remove generator from vehicle.
INSTALLATION
1. Position generator to engine and snap field wire connector into rear of generator. Download File PDF
0 Comments