Ticker

6/recent/ticker-posts

2003 - 2007 Nissan Murano Engine Air Intake Duct Service Procedure

2003 – 2007 NISSAN MURANO ENGINE AIR INTAKE DUCT

CAMPAIGN ID #: R0902

NHTSA #: 09V-169

APPLIED VEHICLES: 2003 – 2007 Murano (Z50)

SERVICE PROCEDURE

1. Disconnect the Positive Crankcase Ventilation (PCV) hose from resonator 1.

2. Loosen the clamps shown in Figure 1 (clamps at both ends of the air duct assembly).

3. Remove the air duct assembly from the vehicle and set it on a clean working surface.

4. After removing the air duct assembly, cover the openings to the electronic control throttle and airflow meter with clean cloth / rags.

CAUTION:

• Make sure to cover the openings to the electronic control throttle and airflow meter.

• Covering the openings will prevent debris entry.

5. Loosen both wire clamps shown in Figure 2 (clamps on both sides of resonator 1).

6. Replace the wire clamp on air duct B. Download File PDF

Post a Comment

0 Comments