2003 Mitsubishi Lancer L4-2.0L SOHC
TIMING BELT REMOVAL
CAUTION: The crankshaft should always be turned only clockwise.
1. Turn the crankshaft clockwise (right turn) to align each timing mark and to set the number 1 cylinder at compression top dead center.
2. Loosen the tension pulley fixing bolt. CAUTION: If the timing belt is to be re-used, use chalk to mark (on its flat side) an arrow indicating the clockwise direction.
3. Place a screwdriver against the tensioner pulley and pry it fully back in the direction of the arrow.
4. Temporarily tighten the tensioner pulley bolt.
5. Remove the timing belt.
INSTALLATION SERVICE POINTS >>A<< TIMING BELT INSTALLATION Download File PDF
0 Comments