ENGINE CRANKS NO START
APPLICABLE MODEL(S) / VINS
2004-2008 RX-8
REPAIR PROCEDURE “A”
1. Verify concern by attempting to start engine.
- If engine starts, return vehicle to customer.
- If engine fails to start, go to STEP 2.
2. Disconnect the secondary air injection pump electrical connector (B1-04).
NOTE:
• This will protect the catalytic converter by preventing rapid light off due to unburned fuel purging from the engine in the following steps.
3. Remove all 4 spark plugs from the engine. See workshop manual section 01-18 SPARK PLUG REMOVAL / INSTALLATION.
4. Disconnect Eccentric Shaft Position Sensor (ESPS) B1-27 connector. Download File PDF
0 Comments