Mitsubishi VR4 4G63-t Vi-PEC VX ECUs Installation and Configuration Manual
Pre-Installation
Before installing theVi-PEC VX ECU into the vehicle some pre-installation checks must be performed.
Installation
This guide provides information on correctly and safely installing your new Vi-PEC VX Plug-In ECU.
ECU Handling Procedures
WARNING!!!
The following installation process will require handling of both the Vi-PEC ECU and factory ECU. Both of these are highly sensitive to electrostatic discharge and are easily damaged. Follow the anti-static precautions given in this manual carefully to avoid damaging electronic components. Warranty claims for ECUs damaged by electrostatic discharge will NOT be accepted.
Fitting the ECU
Audi TT 8N
Information is provided to assist in fitting the ECU into the vehicle.
Fitting a Mitsubishi ECU
The following steps outline the installation procedure:
1. Remove the factory ECU from the vehicle: Ensure the key is in the OFF position. The factory ECU is located on the left A pillar about 30cm above the floor. Unplug the wiring harness from the factory ECU. Remove the 6mm bolts (10mm socket) that retain the ECU and remove the ECU from the vehicle. DO NOT touch the exposed pins in the factory ECU connector. Download File PDF
0 Comments